Carbon nanotubes growth on sub-surface catalyst layer of Cu–Ni nanoparticles thin film

Cu–Ni nanoparticles (NPs) thin films were prepared by Direct Current (DC) magnetron sputtering with Cu and Ni targets. The products were used as catalysts for Thermal CVD (TCVD) growing of carbon nanotubes (CNTs) from acetylene gas at 825°C. In order to characterize the nano catalysts, X-ray Diffraction (XRD) and Atomic Force Microscopy (AFM) and to study the synthesized CNTs Scanning Electron Microscopy (SEM) and Raman Spectroscopy were applied. A remarkable CNT grown on the sub-surface of catalyst layer compared to its top is deduced from SEM images. Despite the poor catalytic activity of the top-surface, these considerations led us to conclude more catalytic activity of the sub-surface.     

Horizontal bracing to enhance progressive collapse resistance of steel moment frames

In this paper, the effect of horizontal bracing on enhancing the resistance of steel moment frames against progressive collapse is investigated. Previously designed 6 bay by 3 bay 18‐story steel frame prototype building with 6 m bay span (namely, unbraced frame), which was susceptible to progressive collapse, is retrofitted by four types of horizontal bracing systems on the perimeter of the topmost story and analyzed using 3D nonlinear dynamic method. Six different cross‐sections for each bracing system type are considered, and the capacity curves for each model are obtained. Three column removal circumstances, namely, Edge Short Column, First Edge Long Column, and Edge Long Column are considered in this paper. The results imply that horizontal bracing would increase the resistance of moment frames against progressive collapse. However, one of the bracing types in which axial compressive force is created in braces is not appropriate for retrofitting.     

The effect of substrate surface integrity on the surface properties of TiCrN coating applied via the CAE-PVD method

This study aims to investigate how the predeposition machining processes such as magnetic grinding, turning machining, and wire electrical discharge machining can influence the surface properties including electrochemical and tribological behavior of TiCrN nanostructured coating applied on Mo40 steel substrate. A physical vapor deposition technique using cathodic arc evaporation was used to apply the coating. The crystallographic phases and the microstructure of the coating were studied by X-ray diffraction and scanning electron microscope, respectively. Rockwell-C, electrochemical impedance spectroscopy and potentiodynamic polarization, and pin-on-disk wear tests were employed to evaluate the adhesion strength, corrosion behavior, and tribological property of specimens, respectively. The electrochemical results after 24 h of exposure to 3.5 wt% NaCl solution showed that TiCrN coating pretreated with a turning process with polarization resistance of about 3525.32 Ω.cm² had the best corrosion resistance among all specimens. This was because of the improvement of the smoothness, surface quality, and adhesion after the turning process. On the other, the friction coefficient of the grounded sample is less than that of other ones. This is probably due to its higher adhesion strength and higher surface smoothness.     

Self-esteem stability and depressive symptoms in acute stroke rehabilitation: Methodological and conceptual expansion.

Objectives: Explore the relationship of self-esteem level, self-esteem stability, and other moderating variables with depressive symptoms in acute stroke rehabilitation. Measures: One hundred twenty participants completed measures of state self-esteem, perceived recovery, hospitalization-based hassles, impairment-related distress, and tendency to overgeneralize negative self-connotations of bad events. Self-report of depressive symptoms was collected at admission and on discharge. Four regression analyses explored the relationship of self-esteem level and stability and each of 4 moderating variables (perceived recovery, hassles, impairment-related distress, and overgeneralization) with depressive symptoms at discharge. Results: Analyses indicated significant 3-way interactions in the 4 regression models. In general, individuals with unstable high self-esteem endorsed greater depressive symptoms under conditions of vulnerability (e.g., lower perceived recovery) than did individuals with stable high self-esteem. Under conditions of vulnerability, participants with stable low self-esteem indicated the highest levels of depressive symptoms. Implications: Self-esteem level and stability interact with psychological, environmental, and stroke-specific variables to predict depressive symptoms at discharge from stroke rehabilitation. This suggests the viability of self-esteem stability in exploring depressive symptoms in this setting and the complexity of emotional adjustment early after stroke. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Nanoscale vibration analysis of embedded multi-layered graphene sheets under various boundary conditions

The present article deals with the vibrational analysis of multi-layered graphene sheets with different boundary conditions amongst sheets. An elastic multiple-plate model is utilized in which the nested plates are coupled with each other through the van der Waals interlayer force. The interaction of van der Waals forces between adjacent and non-adjacent layers and the reaction from the surrounding media are included in the Reissner–Mindlin-type field equations on which the theoretical formulation is based. The set of coupled equations of motion for the multi-layered graphene sheets is then solved by the generalized differential quadrature method. The numerical analysis presented herein provides the possibility of considering various combinations of layerwise boundary conditions in a multi-layered graphene sheet. Based on exact solution, explicit formulas for the frequencies of a double-layered graphene sheet with all edges simply supported are also obtained. The results of the present numerical solution are shown to be in excellent agreement with those of exact solution for simply supported graphene sheets.     

Two-sided wind catcher performance evaluation using experimental,numerical and analytical modeling

Experimental wind tunnel and smoke visualization testing as well as CFD and analytical modeling were conducted to investigate the performance of a two-sided wind catcher. This type of wind catcher is divided internally into two halves for the purposes of air supply and extract. In this study, the two-sided wind catcher model was constructed of two similar one-sided wind catcher models, which were attached together back to back. These one-sided models are 1:40 scale models of Kharmani's School wind catcher in the city of Yazd. Experimental investigations were carried out using an open-circuit wind tunnel and both the induced volumetric airflow into the building and the pressure coefficients around all surfaces of the wind catcher model were measured at various wind angles. Furthermore, the CFD simulation was also used to evaluate the pressure coefficient distribution and airflow pattern around and through the wind catcher. Additional experimental tests and computational fluid dynamics simulation of the wind catcher in the wind tunnel were also conducted in order to assess the accuracy of measurement procedures and the uncertainty of experimental results. This article also represents a semi-empirical approach in which experimental data were used for a detailed analytic model, in order to provide an accurate estimate of the performance of wind catchers. It was found that for an isolated two-sided wind catcher model, the maximum efficiency is achieved at the angle of 90°. At this air incident angle the wind catcher efficiency increases approximately 20% more than the one at zero angle. The experimental investigations demonstrated the potential of two-sided wind catcher for enhancing the natural ventilation inside buildings. It can be seen that CFD simulation and analytical modeling results have a good agreement with the experimental results. Theoretical modeling can also help to assess the accuracy of measurement procedures and the uncertainty of experimental results.     

Terrorist targeting and energy security

Sudden, short-term disruptions seriously endangering energy security can be triggered by a variety of events—among them attacks by terrorists. This study investigates terrorist attack practices against energy infrastructures and discusses how we may understand them. Our results indicate that attacks against energy infrastructures are comparatively few. Also, we find no strong connection between the ideologies of various terrorist groups and their proclivity to attack. In addition, the highly disproportionate number of attacks in a handful of countries highlights the strong geographic concentration of attacks. To explain these findings, we analyze terrorist targeting incentives including intimidation levels, symbolism, attack feasibility, and concerns for stakeholders. We argue that terrorists in general have comparatively few incentives to attack energy supply infrastructures based on our assessment of these factors. Moreover, higher levels of terrorist incidents in states more prone to internal violent conflict may suggest stronger incentives to attack energy infrastructures. When outlining energy security policies, the low frequency of worldwide attacks coupled with the high concentration of attacks in certain unstable countries should be taken into consideration. Energy importing countries could benefit from developing strategies to increase stability in key energy supply and/or transit countries facing risks of internal instability.